Electrodes

Print

ES 32.00

Welding of all kinds of light constructional work in all positions, including pipe welding.

For more information, Click here

ES 32.04

Welding of shells of railway vehicles, cars, light vehicles and other steel sheet structures and general light structural steels.

Coating is flexible, so that it can be bended.

For more information, Click here

ES 45.00

Basic coated electrode designed for high quality welds. Excellent strength and toughness properties. Also suitable for welding steels with low purity and high carbon content. Metal recovery about 120% Good weld ability.

For more information, Click here


ES 45.04

Basic coated electrode designed for high quality welds. Excellent strength and toughness properties. Also suitable for welding steels with low purity and high carbon content. Metal recovery about 120% Good weld ability.

For more information, Click here

ES 47.00

Basic coated electrode for high quality welds. Weld metal extremely ductile and crack resistant, this especially suitable for rigid weldments with large seam cross sections. Good weld ability tack welding of steels of ships, building and bridges.

For more information, Click here

ES 55.00

Excellent strength and toughness properties. Also suitable for welding steels with low purity and high carbon content. Metal recovery about 115% Good weld ability. Suitable for welding in steel construction, boiler making, ...

For more information, Click here

ES 6010

Used for welding of large diameter pipelines for crude oil, natural gas, water and for root and filler pass welding of ships, tanks, boiler, steel constructions, Pressure pipe, galvanized surface and steel casting repairs, ...

For more information, Click here

ES 7010

Used for the welding of large diameter crude oil and gas pipelines made of high strength steel, boiler steel constructions, root and filler pass welding in all positions. For root pass 6010 is recommended.

For more information, Click here

ES 8010

Used for the welding of crude oil and gas pipeline made of high strength, low alloyed steels. Used in all positions especially suitable for vertical down position. For root pass 6010 is recommended.

For more information, Click here

ES 8018 G

Welding of 540N/mm2 class high tensile strength steel of pressure vessels, bridges, penstocks and rails.

For more information, Click here

ES 8018 B2

Welding of 1.25%Cr-0.5% Mo steel used for steam pipes of boilers, oil refining industries, casting and pressure and high temperature service, high temperature synthetic chemical industries.

For more information, Click here

ES 9018 G

Welding of 590/mm2 class high tensile strength steel of pressure vessels, bridges, penstocks, vehicles and machineries.

For more information, Click here

ES 9018 B3

Welding of 2.25%Cr-1% Mo steel for main steam pipes of boilers, for electric power plant and marine use, equipments for oil refining and high temperature synthetic industries.

For more information, Click here

ES 308

Welding of low carbon 18% Cr-8% Ni stainless steel, (AISI (SUS) 304L)

Extra-low carbon, AC/DC, LMA electrode, also suitable for welding stabilized stain-less steel of similar composition and self-relieving

For more information, Click here

ES 309

Welding of 22% Cr-12%Ni steel and heat resisting castings, clad stainless steel.

Welding of dissimilar metal such as carbon steel to stainless steel.

For more information, Click here

ES 310

Welding of AISI (SUS) 310S, SCS 18 and clad side of 18%Cr-8%Ni stainless clad steels.

For more information, Click here

ES 316

Welding of low carbon 18%Cr-12%Ni-Mo stainless steel, austenitic stainless steel which are required and the place where heat treamtment after welding is impossible.

Also suitable for welding stabilized steels of similar composition.

For more information, Click here

ES EST

For repairing of various kinds of cast iron products.

For more information, Click here

ES NiFeCl

Used for the welding of grey cast iron, temper cast iron as well as the joint welding of cast iron to steels hard to weld, cased parts, repairing of cast iron such as cylinder covers, motor beds, casing and gears.

For more information, Click here

ES HF 30H

Hard facing of roller and shear used at elevated temperature, ingot tongs and forged metal mould.

For more information, Click here

ES HF 40

Hard facing of shafts, roller, spindle, crane wheel, etc.

For more information, Click here

ES HF 45

Hard facing of idlers, roller, bulldozers blades, sprockets, caterpiller links, crushers, dripper teeth and conveyors, etc.

For more information, Click here

ES HF 50

Hard facing of cold or hot shearer blade, liner pump casting generator-water turbine, line dredger.

For more information, Click here

ES HF 50 HT

Hard facing of metal mould, thermal cutting off machine, forging mould, dotting punch, compression tap, impact tap and axis of rotation.

For more information, Click here

ES HF 60

Hard facing of cutter knives, dredger and mixer.

For more information, Click here

ES HF 65

Hard facing of impellers, pump casing.

For more information, Click here

ES HF Mn

Hard facing of crusher, high manganese rails, buckets, bulldozers parts and build-up of parts subject to serene impact and abrasion.

For more information, Click here

| + - | RTL - LTR